1.800.635.6106

Product Search
Menu
Ranch Hitch Adapter
3100 - Ranch Hitch Adapter

Transform your 5th wheel tra...

  
$449.99 (USA)
3101 - Standard Adapter Stinger and Cable System

The adapter stinger and cable system...

  
$219.99 (USA)
3102 - Adapter Base & Bolt Package

The adapter base is the black portio...

  
$269.99 (USA)
3107 Ranch Hitch Adapter bolt kit 3107 - Bolt Kit for Ranch Hitch

Bolt Kit for the ranch hitch adapter...

  
$19.99 (USA)
3109 - Safety Chains

Our safety chains are built tough. They have...

  
$69.99 (USA)
3110 - Collar System

This is a 3 piece system. There are ...

  
$49.99 (USA)
3111 - Cable Handle

This is the black cable hand on the ...

  
$9.99 (USA)
3112 - 4 bolt Cable System

The 4 bolt cable system is the curre...

  
$59.99 (USA)
3139 - Ranch Hitch Adapter with 8" offset

Transform your 5th wheel trailer&nbs...

  
$499.99 (USA)
3140 - 8" Offset, stinger, and cable (no base)

The 3140 offset stinger assembly all...

  
$269.99 (USA)

If you want to pull a 5th wheel trailer but don't want to lose your truck bed to a bulky 5th wheel hitch, we have the solution for you! You can use any standard gooseneck hitch in your truck bed with our Ranch Hitch Adapter attached to the trailer.

The Ranch Hitch Adapter is the only 5th-wheel-to-gooseneck adapter on the market that meets V19 Certification. V19 is the strongest safety certification available for gooseneck connections. The Ranch Hitch Adapter can pull a trailer weighing up to 24,000 lbs with 6,000 lbs tongue weight.

Not only is it strong, it is also very easy to use. Most gooseneck receivers require you to get into the bed of your truck to latch the coupler; not so with the Ranch Hitch Adapter. The remote cable mechanism allows you to engage and release the coupler while standing on the ground outside your pickup. The bell shaped receiver allows for the hitch ball and adapter to be as much as 3" off center, and still slide into place correctly. With 3" of vertical adjustment you can be sure your trailer matches up level with your truck.

We now offer the adapter with an 8" offset for use with shortbed trucks. The extra 8" gives you more room between the over-hang of your trailer and the cab of your truck allowing you to turn more easily. The offset version includes all the same benefits of the straight version and is also rated for 24,000 lbs and 6,000 lbs tongue weight.

Our Ranch Hitch Adapter is quick and easy to install. (For full instructions, click on the installation video below.) The installation is simple and takes roughly an hour to complete. To see if the adapter will fit your 5th wheel, do the following: Back your truck into position to hook up your 5th wheel. Measure from the "pin plate" (the bottom of the pin box) down to the top of the ball in the bed of your truck. When the adapter is fully compressed that measurement is 11-3/4". It has 3" of adjustment, so when it is fully extended that measurement will be 14 3/4". You should have 5" or 6" of clearance between the over-hang of the trailer and the sideboards of your truck, keeping in mind your 5th wheel should be level for traveling.

  • Fits standard 2-5/16" gooseneck ball hitch.
  • 24,000 lb. trailer GVWR and 6,000 lb. tongue weight.
  • 3" vertical adjustment from 11-3/4" to 14-3/4".
  • Kit includes all hardware for attachment to 5th wheel trailer.
  • Easy installation, even an inexperienced do-it-yourselfer can install it in less than an hour.
  • Only adapter with remote coupler release.
  • Only adapter that meets V19 standards

 

PDF Icon


  INSTALLATION MANUAL - Ranch Hitch Adapter (Straight and Offset versions).

(Click icon to view, right-click icon and choose "Download Linked File As..." to download)